Tailwind · Vol I, N° 01
Tailwind.

An aviation study journal

Back to area

Task APilotage and Dead Reckoning

8/8

PA.VI.A.S3· S

Track within 3 nm, timing checks

Maintain track within 3 nm and use timing/distance/groundspeed checks

This is the element the examiner grades with a stopwatch and a ruler. Everything in Task A converges here, into four numbers.

The ACS standards, verbatim

The examiner checks three skill items against fixed tolerances:

  • S5 — "Verify position within three nautical miles of the flight-planned route."
  • S6 — "Arrive at the en route checkpoints within five minutes of the initial or revised ETA, and provide a destination estimate."
  • S7 — "Maintain the selected altitude, ±200 feet and heading, ±15°."

Four numbers to know cold: 3 NM, 5 minutes, ±200 ft, ±15°.

Running the checks in flight

Timing and groundspeed. Start a clock over a checkpoint, stop it over the next. GS = distance ÷ time. Worked example: your first two checkpoints are 20 NM apart and you planned 11 minutes (≈109 kt). You actually cross the second at 12.5 minutes, so GS = 20 ÷ (12.5 ÷ 60) ≈ 96 kt — slower than planned. Apply 96 kt to the remaining distance and every ETA slides later; update them now, not at the destination.

The destination estimate isn't optional. S6 wants you to do that same division for the whole remaining route and give the examiner a time: "At current groundspeed, destination in 34 minutes — 1112 local." The phrase "initial or revised" is the whole point: the examiner wants to see you update the ETA from actual groundspeed, then hold yourself to the revised number within five minutes.

Hold altitude and heading while you compute. The ±200/±15 tolerance is the easiest part to bust, because it goes out the window the moment you drop your head to the E6B. Trim first, then do the math — and glance outside between figures.

Every checkpoint is also a fuel check: compare fuel remaining against the fuel you planned to that point. A groundspeed running slow means you'll burn more than planned to the destination, so the timing check and the fuel check are really the same glance at the panel.

"Maintain the selected altitude" assumes you picked a legal one. Above 3,000 ft AGL in cruise, VFR uses the hemispheric rule (): on a magnetic course of 0–179° fly odd thousands + 500 ft (5,500, 7,500…); on 180–359° fly even thousands + 500 ft (4,500, 6,500…). Choose the altitude that fits the rule, the terrain (the MEF from K3), the winds, and your cloud clearances — then hold it within ±200 ft.

A pilot who never revises the ETA and lands twelve minutes off fails S6 — even if the original plan was perfectly reasonable. The standard rewards updating, not just planning.

★ Next up

PA.VI.B.K1 · GPS operation & limits

Civilian GPS is accurate to a few meters today because Selective Availability — the deliberate accuracy degradation the military once applied — was switched …